Rx Set:
The Rx Set expands your Trail Tracer fleet with everything needed to set up an additional vehicle for use with your existing Transmitter (not included). It includes a Receiver Board, two Sensor Coils, a Charge Port board, and two Beacon Tx boards.
Features:
Automatic battery charging - requires the Charge Port board and a DIY charging dock
Wireless Telemetry - monitor the vehicle wirelessly from up to 200’ away with the addition of an ESP32 + display
Multi-vehicle collision avoidance - run multiple vehicles on the same trail. Add a BeaconTx to the rear bumper of each vehicle to prevent them from crashing into each other
Creep Throttle - add a BeaconTx anywhere along the trail to trigger automatic throttle changes
SineSwerve - offsets the steering controller set point in a slow moving sine wave pattern. This can reduce acute trail erosion by distributing tire tracks over a wider area
Rear steering and dual sensors - with the addition of a second sensor coil on the rear bumper, the vehicles heading relative to the wire can be measured. The heading can be used with the rear-steering controller for vehicles with steerable rear wheels, or it can be fed into the main steering controller for
Required for use:
Trail Tracer Transmitter (included with the Basic or Advanced sets)
R/C car with ESC and Servo that use a standard PWM servo signal
Micro USB cable to connect Rx Board to PC
Charge system (optional) requires DIY construction of a charge port system
Instructions / Tutorial Videos:
https://docs.google.com/document/d/1xJ2LJ5pYNEHwpYQQPe2vaVs65cMxHG_B790lyTUjJ9g/edit?usp=sharing